Japanes remote control

[chrisalvin2005]

Hi All!

This is my first post.

can anyone help me how to set up this remote control.
Manual is Japanese and can't read kanji.

I found the web site and the .pdf file of my remote control manual.

http://www.ohm-electric.co.jp/showca.../av-r800_2.pdf

All i need is steps 1,2,3 and 4.

I don't need maker codes section because i can read Katagana.

Thanks
chris

[snbzk]

If only one model is being configured, configure in A- or B-mode.
If two models are being configured, after completing configuration of one mode, configure the other mode.

1. To set up A-mode, hold down the appropriate device button (milky-white テレビ/ビデオ/DVD buttons) and press the channel up ^ button.
To set up B-mode, hold down the appropriate device button and press the volume up > button.

2. The device button lights up red.

3. Enter the model's 3-digit maker code on the channel keypad. Use the '10' button if there is a 0 in the code.

4. When the device button blinks once, the configuration is complete. (I'm not sure about the last sentence - I think it says to test whether the configuration is correct by pressing the power button.)

[chrisalvin2005]

Thanks for translation.
It was a great help.